Samsung S27CM70 Series User Manual page 8

S27CM70* / S32CM70*
1
Put the stand base onto the stand neck
as the direction shown in the figure.
Check that the stand neck is firmly
connected.
4
Push the assembled stand into the main body in the direction of the arrow as
shown in the figure.
2
Tightly fasten the connecting screw at
the bottom of the stand base. Fasten
the large screw in the middle for
assembly.
- 8 -
3
4
As shown in the figure, remove the
product and foam cushion, and then
place the product on the table with its
front side facing the floor.
5
4
After installing the stand, place the
product upright.