Table of Contents
Advertisement
Settings
194
LANGUAGE
Message/call voice notifications Language: Tap to set Text-to-speech
output. Choose Google Text-to-speech or LG TTS+. If you choose
Google Text-to-speech, tap the Settings icon
and Settings for Google Text-to-speech Engine, and Install voice
data. If you choose LG TTS+, tap the Settings icon
Language and Settings for LG TTS+.
Speech rate: Sets the speech rate. Choose from Very slow, Slow,
Normal, Fast, and Very fast.
Listen to an example: Tap to play a short demonstration of
Text-to-speech.
Default language status: English (United States) is fully supported.
Lower screen brightness: Checkmark to dim the screen's backlight for a
darker contrast.
Accessibility shortcut: Tap the Accessibility shortcut switch
upper-right corner of the screen) to open Accessibility quickly on any
screen.
Text-to-speech output: Tap to customize text-to-speech (TTS) settings.
HEARING
Audio type: Sets the audio type. Choose Mono or Stereo.
Sound balance: Routes the sound through both the right and left
channel when a headset is connected. To manually set the audio route,
move the slider on the sound balance slide bar to set it.
Notification LED: Tap the Notification LED switch
corner of the screen) to toggle it On or Off. On activates the LED light
for incoming calls and notifications.
Flash alerts: Checkmark to allow a flash to blink for incoming calls and
notifications.
Call reject message: Checkmark to send a message customized for
those with hearing impairments when a call is rejected.
Turn off all sounds: Checkmark to turn off all sounds.
to set Language
to set
(at the
(at the upper-right
Advertisement
Table of Contents
