Vassilias R-052T Instruction Manual

Convector Usage Guidance

Please read this guidance carefully before using the electrical appliance, so that you can use it
correctly.
Please keep well with this guidance.

Brief Introduction of the product:

The convector adopts convecting heating technology, and has a high heating efficiency,
centralized heat and adjustable heating range. Also it has available accessories such turbo. The
convector has a reasonable foot structure not easy to be toppled by accident.

Assemble before you use:

Please assemble the feet and the body in the order given in the picture below:
1. Place the convector on the flat desk or carton.
2. Insert the 2 position fins of the feet into the position holes of the body.
3. Tight the fixed screw to connect body .and feet.
Position hole
Position pin

Technical parameters:

Model Rated Power
R-052T 2000W

Usage:

1. Please check before you use:
A: The heating wire and electric wire can not be broken.
B: Please do not use the socket lower than 10A for fear of any accident.
2. Use the convector on the flat place to avoid being toppled.
3. There are 2 switches for the power setting. "I" is for 800W; "II" is for 1200W. You can get 3
power setting 800W, 1200W, 2000W (800W+1200W).
4. There is a thermostat knob for adjusting heating. You can rotate the knob to get your desired
heating level.
5. For the convector with turbo, there is a independent switch for this function.
6. If you stop using convector, turn off all the power switch, then put off the plug.
7. If you want to move the convector, please turn off the switches, then put off the plug, and hand
on the handle on the back of the convector.
INSTRUCTIONS MANUAL
MODEL R-052T
Rated Voltage Rated Frequency
230V~
Fixed screw
50Hz