Kogan SMARTERHOME KAWPWTRFNTA User Manual page 10

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator
is flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode:
1. Disconnect the power adapter, wait 10 seconds then reconnect it and tap "Next".
2. Press and hold the mode button for 5 seconds until the Wi-Fi indicator begins
flashing rapidly. If the indicator is flashing slowly, press and hold the mode button
again for 5 seconds until the Wi-Fi indicator begin flashing rapidly and tap "Next".
3. Tap "Confirm the indicator is fast blinking" and click "Next".