Advertisement
START YOUR DISHWASHER
1. Press the On/Off button.
2. Select a cycle and option if desired .
3. Press Start .
ADD RINSE AID
This dishwasher is designed to be used
with rinse aid, which enhances drying
results and shine .
• Add rinse aid before first use and when
the Add Rinse Aid indicator light on the
control panel illuminates .
• Lift tab to open the rinse aid reservoir
and add liquid rinse aid into the oval
until it is full, avoiding air vent . Wipe up
any excess rinse aid that may puddle .
Tip: Remove lid of rinse aid bottle for easier pouring.
The amount of rinse aid dispensed can be set in 6 levels . Only change the
setting if streaks remain on the dishes (lower the amount), or if dishes are not
getting dry enough (increase the amount) .
Setting
§-Rinse Aid
§:‹†-§:‹‡
š-Intensive drying
š:‹‹-š:‹‚
˜-Auto power off
˜:‹‹-˜:‹ƒ
ADJUSTING THE SETTINGS
1. Press the On/Off button. Hold down the selection buttons > and
START until the display shows
2. Release both buttons . Press the selection button > until the display
indicates the desired selection .
3. Press button < to choose the desired setting for that selection .
4. Press Start button to save the setting .
8
9001490757.ER.indd 8
Factory setting
Description
Dispenses the amount of rinse
§:‹†
aid, which affects drying (see
above) .
š:‹‹/ off
Improved drying for
glasses and plastic, by increasing
the temperature and length .
˜:‹‹/ unit does
Unit turns itself off after cycle is
not shut off
complete, either after 1 minute,
automatically
˜:‹‚ or after 2 hours, ˜:‹ƒ .
x (x can be any number) .
š:‹
max
air
vent
11/5/2019 11:29:05 AM
Advertisement
