Entering The Operator's Position; Operating The Parking Brake; Operating The Mower Blade-Control Switch (Pto) - Toro TimeCutter HD MyRide 75210 Operator's Manual

Entering the Operator's
Position
Use the mower deck as a step to get into the
operator's position (Figure
Figure 12
Operating the Parking
Brake
Always engage the parking brake when you stop the
machine or leave it unattended.
Engaging the Parking Brake
Park the machine on a level surface.
Figure 13
12).
Disengaging the Parking Brake
To disengage the parking brake, pull the lever out of
the detent slot and toward you, then push it down
(Figure 14).
1. Push the parking brake
out of the detent slot and
toward you.
g029797
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Note:
Always engage the blades with the throttle in
g188778
the F position
AST
20
Figure 14
2. Push the parking brake
down.
Figure 15
(Figure 16).
g188777
g008945