Download Print this page

Breville Fast & Easy BMO230 Instruction Book page 11

Hide thumbs Also See for Fast & Easy BMO230:

Advertisement

BEFORE FIRST USE
Before first use remove all promotional stickers
and packaging material.
Carefully unpack the microwave oven and
keep all the packing material until all the
parts of the microwave oven have been found
and the appliance has been assembled. It is
recommended to keep all the packing material
in a safe place in case you wish to repack the
product for shipping purposes.
To remove any dust that may have accumulated
during packing, wash the roller ring and glass
turntable in warm soapy water, rinse in clean
water then dry thoroughly. Wipe the interior and
exterior of the microwave oven with a soft, damp
cloth then dry thoroughly.
ASSEMBLING THE GLASS TURNTABLE
AND TURNING ON THE MICROWAVE
OVEN
1. Place the roller ring into position in the
indented space in the oven cavity base.
2. Insert the glass turntable into position,
matching the indents (hub) on the base of
the glass turntable with the indents in the
shaft located in the centre of the oven cavity
base.
3. Plug the power cord into a 230V or 240V
power outlet. Switch on at the power outlet.
The microwave oven is now on.
INSTALLATION
1. Select a level surface that provide enough
open space for the intake and/or outlet vents.
2. A minimum clearance of 7.5cm is required
between the oven and any adjacent walls.
One side must be open.
• Leave a minimum clearance of 30cm
above the oven.
• Do not remove the legs from the bottom
of the oven.
3. Blocking the intake and/or outlet openings
can damage the oven.
4. Place the oven as far away from radios and
TV as possible.
5. Operation of microwave oven may cause
interference to your radio or TV reception.
6. Plug your oven into a standard household
outlet. Be sure the voltage and the
frequency is the same as the voltage and the
frequency on the rating label.
7. The microwave must not be placed in
a cabinet.
30cm
7.5cm
WARNING
• Do not install oven over a range cooktop or
other heat-producing appliance. If installed
near or over a heat source, the oven could be
damaged and the warranty would be void.
• Check the oven for any damage, such as
misaligned or bent door, damaged door
seals and sealing surface, broken or loose
door hinges and latches and dents inside the
cavity or on the door. If there is any damage,
do not operate the oven and contact a Breville
service centre.
• Do not immerse the microwave oven, power
cord or plug in water or any other liquid.
7.5cm
11

Advertisement

loading