WINE STORAGE AND CONTROL PANEL Power On/O Control Temperature Setting Temperature Display Window Interior Lighting Control CLEANING THE WINE COOLER Cleaning Your SnoMaster Wine Cooler Power Failure Moving the Wine Cooler Energy Saving Tips TROUBLESHOOTING Warranty, Service And Support Warranty Registration...
SNOMASTER VT-19R RETRO WINE COOLER This manual contains important information including safety and installation instructions of the SnoMaster Wine Cooler. Please read this manual carefully before use and follow all safety information and instructions. It is recommended to keep this manual for easy reference so that you are familiar with the operation of your appliance.
Page 4
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to prevent any hazard. • The fuse (or circuit breaker) size should be 10 amps or higher. • This appliance can be used by children aged 8 years and older and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning the safe use of the appliance,...
The recycle symbol on the product or its packaging indicates that this product must not be disposed of as regular household waste. It should be taken to a designated collection point for recycling electrical and electronic goods. STRUCTURE AND INSTALLATION The images provided below only describe the appliance.
UNPACKING AND CLEANING THE WINE COOLER • Remove all exterior and interior packing materials. • Before connecting the appliance to a power source, let it stand upright for approximately 24 hours. This helps to reduce the possibility of a cooling-system malfunction due to handling during transportation.
WINE STORAGE The standard shelves are optimally designed for Bordeaux-style bottle storage. The maximum bottle capacity may vary depending on the sizes or dimensions of the wine bottles you intend to store. • To prevent damage to the door gasket, ensure the door is fully opened before pulling out the shelves.
WARNING To avoid stressing the compressor, please do not turn on the appliance again within 5 minutes after you turn it o . TEMPERATURE SETTING • The temperature setting range for this appliance is between 5°C - 20°C. • Touch the control button to cycle through and set the desired temperature.
CLEANING THE WINE COOLER • Turn off the power, unplug the appliance, and remove all contents including shelves. • Use a sponge to clean the inside surfaces with a solution of baking soda and warm water. The solution should consist of approximately 2 tablespoons of baking soda to 1 litre of warm water.
ENERGY SAVING TIPS • Position the appliance away from heat -generating appliances and direct sunlight. • Maintain adequate ventilation around the unit. Never obstruct the air vents. • Only open the door when necessary. Limit extended periods of the door being open or frequent opening and closing.
Page 11
TROUBLESHOOTING PROBLEM PROBLEM POSSIBLE CAUSE / MEASURE Too much vibration • Check to assure that the appliance is level. • Check to assure no parts inside the cabinet or in the compressor chamber are loose. The wine cooler seems • The rattling noise may come from the ow of the to make too much noise refrigerant, which is normal.
ON COMPRESSOR ON THE UNIT THANK YOU FOR PURCHASING THE SNOMASTER VT-19R WINE COOLER WARRANTY, SERVICE AND SUPPORT This product is warranted for 5 years on the compressor, 3 years on the unit and 1 year on all parts not listed from the date of purchase.
Need help?
Do you have a question about the VT-19R and is the answer not in the manual?
Questions and answers