Related Manuals for Streckfuss A075/Ri
Summary of Contents for Streckfuss A075/Ri
- Page 1 MODEL A075/Ri OPERATING INSTRUCTIONS Serial Number • Tel: 972-790-1614 Fax: 972-881-9199 Streckfuss Streckfuss USA, Inc 1401 Capital Ave. Plano, TX 75074...
-
Page 2: Table Of Contents
A075/Ri TABLE OF CONTENTS GENERAL DESCRIPTION SETTING UP THE MACHINE ADJUSTMENTS Body Thickness 1, 2 Lead Span 2, 3 OPERATION Loading Input Tubes 3, 4 Loading Output Tubes Control Panel 5, 6 PREVENTIVE MAINTENANCE Daily Weekly TECHNICAL SPECI FICATIONS ELECTRICAL DIAGRAM... -
Page 3: General Description
GENERAL DESCRIPTION: The Streckfuss model A075/Ri is designed to form the leads of dual in-line components utilizing a tube-to-tube feeding configuration. Fully adjustable, the A075/Ri requires no die changes which allows a wide range of component sizes to be processed quickly and easily. The lead span adjustment is displayed on a digital panel meter and the operating speed is infinitely variable. -
Page 4: Body Thickness
Raise the collar until it contacts the linear bushing. Re-tighten the thumb screw when finished. Thumb Screw Linear Bushing Collar Figure 2 Lead Span or "Pitch" Set the panel meter selector switch to the 2 position. Panel Selector Figure 3 Page 3 A075/Ri ADJUSTMENTS: Lead Span or "Pitch"... -
Page 5: Operation
The tube should fit onto the rails without any side to side play. Page 4 A075/Ri OPERATION: Loadinq Input Tube Insert tube until it contacts the stop plate. The stop plate will keep the components in the... - Page 6 Page 4 A075/Ri OPERATION: Loadinq Input Tube Insert tube until it contacts the stop plate. The stop plate will keep the components in the tube until they are presented to the guide rails. Component Tube Stop Plate Guide !<oils Figure 6 While holding the tube against the stop plate, swing the tube attachment upward until the components slide onto the guide rails.
-
Page 7: Loading Output Tubes
Page 5 A075/Ri OPERATION: Loadinq Output Tube Lift upward on the tube retainer knob and turn the knob ~ turn to disengage the retaining plate. Tube Retainer Knob Lead In Roil Adjustment Knob Output Tube Figure 8 Turn the lead in rail adjustment knob in the direction as needed until the bottom of the tube slides easily onto the lead in rails. -
Page 8: Preventive Maintenance
Page 6 A075/Ri OPERATION: Control Panel Turn the speed control knob clockwise until the desired operating speed is reached. After all the components have been transferred from the input tube to the output tube turn the power switch off to "0". -
Page 9: Electrical Diagram
Streckfuss USA, Inc Tel: 972-790-1614 - Fax: 972-881-9199 1401 Capital Ave. Plano, TX 75074 STRECKFUSS RECOMMENDED SPARE PARTS Model A075/Ri June 1991 PART NUMBER DESCRIPTION QTY. P-A075-510 Spare Parts Kit 1 ea. P-A075-001 Belt Transport 1 ea. P-A075-011 Linear Bearing ( 10mmx38mm ) 1 ea.
Need help?
Do you have a question about the A075/Ri and is the answer not in the manual?
Questions and answers