Cab Controls - Toro 30605TE Operator's Manual

Cab Controls

1. Air-conditioning switch
2. Air-recirculation control
3. Fan control
Air-Recirculation Control
The air-recirculation control sets the cab to either
recirculate the air in the cabin or to draw air into the
cabin from outside (Figure
•
Set it to recirculate the air when using the
air-conditioning.
•
Set it to draw air in when using the heater or fan.
Fan-Control Knob
Rotate the fan-control knob to regulate the speed of
the fan (Figure 8).
Temperature-Control-Knob
Rotate the temperature-control knob to regulate the
air temperature in the cab
Windshield-Wiper Switch
Use this switch to turn the windshield wipers on or
off (Figure 8).
Air-Conditioning Switch
Use this switch to turn the air conditioning on or off
(Figure 8).
Figure 8
4. Temperature control
5. Windshield-wiper switch
6. Blank switches for optional
kits
8).
(Figure 8).
Windshield Latch
Lift up the latches to open the windshield
9). Press in the latch to lock windshield to the O
position. Pull out and down on the latch to close and
secure the windshield.
g032672
1. Windshield latch
Rear Window Latch
Lift up the latches to open the rear window. Press in
on the latch to lock the window in
out and down on the latch to close and secure the
window (Figure
Important:
Close the rear window before opening
the hood or damage may occur to the hood or rear
window.
InfoCenter LCD Display
The InfoCenter LCD display
information about your machine, such as the operating
status, various diagnostics, and other information
about the machine
The screens that display depend on which buttons
you select. The purpose of each button may change
depending on what is required at the time.
19
Figure 9
OPEN
9).
(Figure 5) shows
(Figure
PEN
g196911
position. Pull