Zicooler Suitable UML-046 Instruction Manual page 4

Remote Control Operation
Wind speed +
① When the fan is in the standby state, press the ON/OFF
button to start running; when the fan is in the running state,
press the ON/OFF button to stop running and enter the
standby state.
② Press the strong wind button on the remote control, "HH"
will appear on the screen. Press the button again to exit the
strong wind mode. (Or you can press the wind speed button to
exit the current mode)
③ Press the sleep wind button on the remote control, "LL"
will appear on the screen. Press the button again to exit the
sleep wind mode. (Or you can press the wind speed button to
exit the current mode)
ON/OFF
Timing +
Timing -
Sleep wind
Swing
Wind speed -
Strong wind
4