Advertisement
Quick Links
NBL-W-FGS Fruit Growth Sensors
Changsha ZOKO LINK Technology Co., Ltd
Product introduction
Fruit Growth Sensors are highly accurate
electronic measuring instruments with automatic
temperature compensation.
The instrument can be used to easily
monitor the influence of environmental factors on
the growth of plant fruits and stems. The data
collector or computer measures the daily growth
and long-term growth changes of the plant in real
time through the signal change of the caliper
bridge tension probe.
Technical Parameters
Model No.
Voltage
Signal output
Measuring range
Communication
Baud Rate
Average Power
Consumption
Lifetime
Accuracy
Movable length
Working temperature
NBL-W-FGS
DC12-24V
RS485/4-20mA/0-
5V
A:0-50mm
B:0-100mm
C:0-150mm
D:0-250mm
MODBUS
9600
0.3W
大于 1000000 次
±1%
Maximum
measuring range
+3mm
-40-80℃
Working humidity
length of line
IP rate
Installation
Wiring method
(1) If equipped with the collector produced by our
company, directly use the sensor line to connect
the sensor to the corresponding interface on the
collector.
(2) If the transmitter is purchased separately, the
wiring sequences of the transmitter supporting
lines are as follows:
Line color
voltage
Red
Black
（Green）
Voltage
Yellow
signal
Blue
（3）Transmitter voltage and current two output
wiring methods:
1
0-95%RH
2.5m
IP65
output signal
communi
current
+
+
-
-
Current
signal
cation
+
-
A+
B-
Advertisement
Related Manuals for NiuBol NBL-W-FGS
Summary of Contents for NiuBol NBL-W-FGS
- Page 1 NBL-W-FGS Fruit Growth Sensors Changsha ZOKO LINK Technology Co., Ltd Working humidity 0-95%RH length of line 2.5m IP rate IP65 Installation Product introduction Fruit Growth Sensors are highly accurate electronic measuring instruments with automatic temperature compensation. The instrument can be used to easily monitor the influence of environmental factors on the growth of plant fruits and stems.
- Page 2 NBL-W-FGS Fruit Growth Sensors Changsha ZOKO LINK Technology Co., Ltd Return: 00 10 CRC (4 bytes) Note: 1. The address bit of the read/write address command must be 00. 2. Address is 1 byte, ranging from 0-255. Example: send 00 10 01 BD C0 return 00 10 00 7C 【2】Read device address...
- Page 3 NBL-W-FGS Fruit Growth Sensors Changsha ZOKO LINK Technology Co., Ltd 16-bit CRC register, and put the result in the grounded wire; CRC register; 3. Shift the content of the register to the right by Use an antistatic floor or bench liner if possible.
- Page 4 NBL-W-FGS Fruit Growth Sensors Changsha ZOKO LINK Technology Co., Ltd If the equipment needs to be returned, please carefully pack the instrument according to the original packaging and mail it to our company, and attach the detailed fault instructions of the instrument.