Siemens WG56B20MFG User's Manual And Installation page 49

Malfunction
Program does not start.
Door cannot be
opened.
Washing water is not
pumped out.
Cause and Troubleshooting
Door is not closed.
▶
Close the door.
Child lock is activated.
Deactivate child lock.
▶
→
"Deactivate childproof lock", page 36
Ready in / Fin danceis activated.
Check ifReady in / Fin danceis activated.
▶
→ "Buttons", page 25
Laundry is jammed in the door.
Remove trapped laundry.
▶
is activated.
Resume the programCentral / Essayor Drain /
▶
Vidangeto select and press .
→ "Resume program at rinse hold", page 36
Temperature is too high.
Wait for the temperature to drop.
▶
Cancel program.
▶
→ "Program cancel", page 35
Water level is too high.
Select a suitable program for draining.
▶
→ "Programs", page 28
Power cut.
Open the door with the emergency release.
▶
→ "Emergency release", page 56
Drain pipe or water drain hose is clogged.
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
trapped.
Make sure that the drain pipe and the water
▶
drain hose are not kinked or trapped.
Drain pump is clogged.
→ "Clean the drain pump", page 42
▶
is activated.
Resume the programCentral / Essayor Drain /
▶
Vidangeto select and press .
→ "Resume program at rinse hold", page 36
Water drain hose is connected too high.
TroubleshootingNL
49