Connection To The Telephone; Establishing The Power Supply - Kompernass KH 5010 Operating Instructions Manual

Connection to the telephone

Note:
Connect the telephone amplifier with the telephone BEFORE
effecting a connection to the power source. Ensure that you
FIRST connect the receiver to the telephone amplifier and
THEN the telephone amplifier to the telephone!
1. Remove the plug of the receiver cable from the receiver
socket on your telephone.
2. Insert the plug of the receiver cable into the socket To
Handset
3. Insert one end of the 4P4C/RJ-9 connection cable 0 into
the socket To Phone
connect the other end with the receiver socket on the
telephone.

Establishing the power supply

Battery operation
You can operate the device with a battery (not supplied).
1. Open the cover of the battery compartment 7 on the
underside of the telephone amplifier.
5 on the telephone amplifier.
9 on the telephone amplifier and
- 8 -