Table of Contents
Advertisement
STABLE RUNNING WITH DELAY TIME
Table 5 shows one of applications.
operations in the sequence indicated in the table.
The example in the table is the delay time that is 30
minutes, the chamber temperature is 50
running time is 1 hour and the timer mode is Timer
Mode C.
Table 5: Basic operation sequence (Example: Chamber temperature; 50
Description of operation
1 Press the power key.
2 Press the delay timer key.
Press the delay timer key
3
to reset the delay time.
Set the delay time to 00:30
4
with the digit shift key
and the numeric value shift key.
5 Press the delay timer key.
6 Press the call key.
Set the temp. to 50.0
and the running time to 01:00
7
with the digit shift key and numeric
value shift key.
Press the timer mode key to select
8
the time mode C.
9 Press the run/stop key.
Note:
If there is no need to change the set value in each setting mode, press the call key (CALL) to activate the
next mode.
When setting a continues operation, set "--:--" in the leftmost digit of distal timer indicator (TIME) with
numerical value shift key on the procedure 7 in Table 5.
Press the Run/Stop key (RUN/STOP) when the setting mode needs to be canceled while running of the
unit.
When the delay timer doesn't need to be activated, set the delay time to 00:00.
When the set value needs to be changed, operate a key after the unit stops.
When no key is pressed for 45 seconds, displayed number is memorized, setting is over and indicator
displays the current value.
Perform key
o
C, the
Delay time; 30 minutes, Running time; 1 hour, Timer mode; C)
Key operated
The current chamber temperature is displayed.
POWER
The current delay time is displayed.
DELAY
Reset the delay time.
DELAY
The current chamber temperature is displayed.
DELAY
The left digit of the temperature indicator flashes.
CALL
TIMER
By pressing the key, the timer mode C lamp lights.
MODE
The setting mode is completed and the unit runs.
RUN
STOP
17
o
50
C
30 min
1 hour
o
C,
Indication after operation
Buzzer
Advertisement
Table of Contents
