Advertisement
The EXACT4 Midrange/Woofer can be mounted on the front or rear of a panel; gaskets are
INSTALLING
provided for both options. The bolt hole configuration will fit a variety of standard OEM patterns
THE EXACT4
making it ideal for direct replacement. Best performance is achieved when the speaker is
securely mounted to a door panel or rear deck. There should be no gaps between the speaker
MIDRANGE-
and the mounting surface, as this will impair its low frequency performance. Be certain that both
WOOFER
the panel and the speaker are securely mounted to prevent unwanted vibration.
1) Mark the speaker location by using the template provided.
2) Cut the opening and debur the edges with a file.
3) Hold the speaker in place against the mounting surface and mark the mounting bolt holes.
4) Drill the appropriate size pilot holes for the screws provided.
5) Make all speaker connections prior to mounting the speaker to the panel.
6) Place the EXACT4 into the trim ring, make the speaker wire connections, then install the
speaker/trim ring assembly to the panel using the screws provided. Affix the grille.
7) When routing speaker cables to the driver, it is important to form a drip loop in the cable
below the level of the driver to keep water from reaching it. See Figure 6.
EXACT CROSSOVER
FIGURE 6
6
EXACT TWEETER
EXACT WOOFER
1" TO 2" DRIP LOOP
Advertisement
