Advertisement
Tweeter Attenuation
TWEETER
The SPL 50 system has been designed to provide
LEVEL
optimum sound in a variety of installation locations. The
provided crossover allows for 2 positions of tweeter
CONTROL
level control, 0dB and -3dB. A switch under the plastic
crossover cover sets one of the two positions.
factory setting is 0 dB.
Tweeter Level
Control Switch
WIRING
SPL 5 Wiring Diagram
Figure 6 shows a diagram illustrating the wiring of the
SPL 50 Component Speaker System. It is important to
make sure that all connections are in phase; that is
positive (+) is connected to positive (+), and negative (-)
is connected to negative (-) since an out-of-phase
connection will cause a dislocated image and low bass
output.
connectors provided with this system will accommodate
wire from 12 gauge to 16 gauge.
FIGURE 6
50.pub
page 7
FIGURE 5
We suggest using premium cable.
Head Unit
Amplifier
SPL 5X
Crossover
7
The
The
SPL 1 Tweeter
SPL 5 Woofer
Friday, September 10, 1999 21:04
Advertisement
