Soundstream SPL-50 Owner's Manual page 5

FIGURE 1
Surface Mounting:
1) Drill one 5/16" diameter hole for the tweeter lead wires and two pilot
holes for the mounting screws.
2) Attach the surface mount plate with two flat head screws.
3) Pass the lead wires through the hole. See figure 3.
4) Engage the locking holes on the back of the tweeter onto the tabs on
the plate and rotate counter-clockwise until locked. See figure 4.
FIGURE 3
50.pub
page 5
1
/ " 6-32 machine
4
screw
Flush mount
cup
Mounting
surface
Spring
clip
Turn Counter-Clockwise to Lock Turn Clockwise to Lock
5
Turn Clockwise to Lock
FIGURE 2
FIGURE 4
Friday, September 10, 1999 21:04