Table of Contents
Advertisement
13.1 Preparing the appliance
for cleaning
Switch off the appliance.
1.
→ Page 14
Disconnect the appliance from the
2.
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
Take out all of the food and store it
3.
in a cool place.
Place ice packs (if available) onto
the food.
If there is a layer of hoarfrost, allow
4.
this to defrost.
Remove all fittings and accessor-
5.
ies from the appliance.
→ Page 20
13.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
Liquid in the lighting or in the con-
trols can be dangerous.
The rinsing water must not drip
▶
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads or
▶
cleaning sponges.
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
Cleaning and servicing en
If liquid gets into the drainage hole,
the evaporation pan may overflow.
The rinsing water must not get into
▶
the drainage hole.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
Never clean fittings and accessory
▶
in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 19
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
Switch on the appliance.
6.
→ Page 14
Putting the food into the appliance.
7.
19
Advertisement
Table of Contents
