LG 65UL3E Owner's Manual
Hide thumbs
Also See for 65UL3E:
- Installation manual (38 pages) ,
- Owner's manual (18 pages) ,
- Owner's manual (33 pages)
Table of Contents
Related Manuals for LG 65UL3E
Summary of Contents for LG 65UL3E
- Page 1 OWNER’S MANUAL Safety and Reference LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
- Page 2 Warning! Safety Instructions • Ventilation - Install your monitor where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
- Page 3 • Use only an authorized attachments / accessories approved by damage the product and/or its panel. Otherwise, this may result in LG Electronics. Otherwise, this may result in fire, electric shock, electric shock or product damage. malfunction, or product damage.
-
Page 4: Wall Mounting Bracket
Cable (3 m or less) - High-Speed HDMI®/ Cable with Ethernet (3 m or less) • SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. - Page 5 Lifting and moving the • When transporting the monitor, do not expose the monitor to jolts or excessive vibration. monitor • When transporting the monitor, keep the monitor upright, never turn the monitor on its side or tilt towards the left or right. •...
-
Page 6: Mounting On A Table
Mounting on a Table Using the Kensington security system The Kensington security system connector is located at the rear of the 1 Lift and tilt the monitor into its upright position on a table. monitor. For more information of installation and using, refer to the • Leave a 10 cm (minimum) space from the wall for proper manual provided with the Kensington security system or visit http:// ventilation. -
Page 7: Mounting To The Wall
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the... -
Page 8: External Devices
Connections Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the monitor. Connect various external devices to the monitor and switch input modes to select an external device. For more information of external External Devices device’s connection, refer to the manual provided with each device. -
Page 9: Using Button
Using Button Network Wired network connection You can simply operate the monitor functions, using the button. This monitor can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the monitor needs to be set up for network communication. -
Page 10: Using Remote Control
Using Remote Control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the monitor correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. -
Page 11: Troubleshooting
Troubleshooting Number and Alphabet buttons Enters numerical or alphabetical characters depending upon the setting. Deletes the entered numerical or alphabetical character. Volume Up/Down Button Adjusts the volume. The software version can be updated for improvement in performance. Selects the Aspect Ratio mode. Customer needs to ensure the compatibility of customer’s equipment Automatically adjusts picture position and minimizes image with LGE software. -
Page 12: Abnormal Display
Abnormal display Generated sound • If the product feels cold to the touch, there may be a small “flicker” • “Cracking” noise: A cracking noise that occurs when watching or when it is turned on. This is normal, there is nothing wrong with turning off the monitor is generated by plastic thermal contraction product. -
Page 13: Specifications
Specifications Wireless module (LGSBWAC72) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 14 dBm 5,150 to 5,725 MHz 16.5 dBm 5,725 to 5,850 MHz (Not for EU) 11.5 dBm Bluetooth Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 8.5 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. - Page 14 HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode. (Depending on model) Frequency (kHz) Frequency (Hz) 31.469 59.94 Horizontal Vertical Resolution 640 x 480p Frequency (kHz) Frequency (Hz) 31.5 60.00...
-
Page 15: Supported Photo Formats
Supported Photo Formats Supported Audio Formats File File Format Resolution Item Info Format Format Minimum: 64 (W) x 64 (H) Bit rate 32 Kbps - 320 Kbps Maximum (Normal Type): 15360 (W) x Sample freq. 16 kHz - 48 kHz .jpeg, .jpg, .mp3 JPEG... -
Page 16: Supported Video Formats
Video AVC, Motion Jpeg, MPEG-4 LG Electronics will also provide open source code to you on CD-ROM .avi MPEG-1 Layer I, II, MPEG-1 Layer III for a charge covering the cost of performing such distribution (such... - Page 17 Record the model number and serial number of the monitor. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL No.
- Page 18 OWNER’S MANUAL RS-232C Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
- Page 19 IR CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button...
-
Page 20: External Control Device Setup
EXTERNAL CONTROL DEVICE SETUP Phone jack Type (TV) (PC) (Depending on model) • You need to purchase the phone-jack to RS-232C cable required for RS-232C IN the connection between the PC and the Signage, which is specified RS-232C Setup (CONTROL & SERVICE) (TV) (PC) in the manual. -
Page 21: Communication Parameters
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations Data (Standard RS-232C cable) Command1 Command2 (Hexadecimal) 1 Power 00 to 01 Signage 2 Aspect Ratio (See p. 5) 3 Screen Mute (See p. 6) 4 Volume Mute 00 to 01 5 Volume Control 00 to 64 6 Contrast... -
Page 22: Transmission / Receiving Protocol
Transmission / Receiving Protocol 1 Power (Command: k a) ►To control Power On/Off of the set. (Depending on Model) Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 00 : Off [Command1] : First command to control the Signage. (j, k, m or x) Data 01 : On [Command2] : Second command to control the Signage. - Page 23 3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ►To select screen mute on/off. ►To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission [k][d][ ][Set ID][ ][Data][Cr] [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) / Video mute off Data Min : 00 to Max : 64 Data 01 : Screen mute on (Picture off) * Refer to "Real data mapping".
- Page 24 9 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ►To adjust the screen tint. ►To lock the front panel controls on the Signage and remote control. You can also adjust tint in the picture settings. Transmission Transmission [k][m][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr]...
-
Page 25: Power Saving Function
15 Energy Saving (Command: j q) 17 Equalizer (Command : j v) ►To reduce the power consumption of the Signage. You can also ►To adjust equalizer. adjust Energy Saving in picture settings. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving Level Function... -
Page 26: External Input
20 Input select (Command: x b) (Main Picture Input) * Real data mapping ►To select input source for main picture. 00 : Step 0 Transmission [x][b][ ][Set ID][ ][Data][Cr] Step 10 (Set ID 10) Data Structure Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 :... - Page 27 Record the model number and serial number of the Signage. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL No.