Page 1
STV-60 EU Steel Stand Bedienungsanleitung User Manual STV-60WOT EU Steel Stand Lichtstativ mit Querträger, Made in EU Lighting stand with T bar, made in EU No. 59007011 No. 59007013 www.eurolite.de...
Wenn Sie nachfolgende Hinweise beachten, sind wir sicher, dass Sie über viele Updates, Support und Jahre Freude an Ihrem Kauf haben werden. Diese Bedienungsanleitung zeigt News zur Marke. Sie Ihnen, wie Sie Ihr neues Produkt von Eurolite installieren, in Betrieb nehmen finden all das und vieles und nutzen. mehr auf unserer Website.
WICHTIGE SICHERHEITSHINWEISE • Das Produkt ist kein Spielzeug. Halten Sie es vor WARNUNG! Kindern fern. Lassen Sie Verpackungsmaterial Kippgefahr bei zu hoher Belastung nicht achtlos liegen. Überschreiten Sie niemals die maximale • Das Stativ ist ausschließlich für die Verwendung im Belastbarkeit des Stativs.
VERWENDUNG Öffnen der Stativbeine Die Fixierschraube (1) der Stativbeine (2) lösen und diese nach außen ziehen. Die Fixierschraube wieder festziehen. Leuchten anbringen Einen Querträger oder Adapter (Zubehör) am oberen Stativende (3) aufsetzen und die Fixierschrauben festziehen. Die Leuchten am Querträger bzw. Adapter montieren.
Technische Daten können im Zuge der Weiterentwicklung des Produkts ohne vorherige Ankündigung geändert werden. Zubehör Best.-Nr. 5900702A EUROLITE Tragetasche für Leuchtenstativ LS-1/STV-50 EU Best.-Nr. 5900702B EUROLITE Tragetasche für 2x Leuchtenstativ LS-1/STV-50 EU Best.-Nr. 59007026 EUROLITE Querträger Q3 mit TV-Zapfen 6 • DE...
INTRODUCTION Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is Experience Eurolite. your connection to the world of show with an unparalleled variety of products, Product videos, suitable both for professionals and beginners. accessories, firmware and software updates,...
IMPORTANT SAFETY INSTRUCTIONS • Before taking into operation, check upon possible WARNING! damages. If defective, the stand must not be taken Danger of tipping due to overload into operation. Never exceed the maximum load of the • The stand must only be installed on a plane area stand.
OPERATION Pull out the legs Loosen the safety screw (1) of the legs. Pull out the legs (2). Lock this position with the safety screw. Loading Attach the crossbar or adapter (accessories) on the top end of the stand (3) and tighten the safety screws.
Specifications are subject to change without notice due to product improvements. Accessories No. 5900702A EUROLITE Carrying Bag for Lighting Stand LS-1/STV-50 EU No. 5900702B EUROLITE Carrying Bag for 2x Lighting Stand LS-1/STV-50 EU No. 59007026 EUROLITE Cross Beam Q3 with Pin 11 • EN...
Page 12
Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany D00128453 Version 1.0 Publ. 18/02/2020...
Need help?
Do you have a question about the STV-60 WOT and is the answer not in the manual?
Questions and answers