Advertisement
Titan Commercial Grade LED Display Quick Reference Guide
The front mounted buttons control your Titan Commercial Grade LED Display. Some buttons
serve more than one function. Each button is labeled with all of its functions in the image below.
Access the
Input change in non
OSD menu
menu mode / Select in
menu mode
Before referring to this guide, the display must be mounted & connected to the Nauticomp 12 volt power
Getting Started:
To turn on the Titan Commercial Grade LED Display, you must press and release the power button. To turn
off the display press and release the power button.
Adjusting backlight brightness up and down:
When the display is powered on turn the potentiometer (Dial), to adjust the backlight brightness of the
display.
Changing Inputs:
Press the select button, wait for the input screen in the top left corner. Press the select button until the
desired input is highlighted. Press the up button to select the input.
Accessing the Menu features:
By pressing and releasing the menu button access to the menu will be achieved.
By pressing the up/down buttons 4 different menu tabs will be accessible. When the appropriate tab is
highlighted pressing the select button will gain access to the contents of the tab.
Using the select button will highlight different options inside the tab. When the appropriate option is
highlighted press the up/down buttons to adjust.
Pressing the menu will return to the previous step. Press the menu button again to exit.
See reverse for Installation Guide
Toggle Down
Toggle Up /
Select in non
menu mode
Check out the collection of marine multifunction displays & combos we offer.
Buttons
ON / OFF
supply.
Increase or Decrease
backlight brightness
Advertisement
