Installing The Drain Hose - LG G-M02W Owner's Manual

Installing the Drain Hose

• The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1
Insert the band clamp onto the drain hose
elbow.
2
With the hose leading up from the elbow,
insert the elbow onto the drain outlet on the
back of Mini Washer.
3
Adjust the band clamp with pliers to keep
the hose securely in place and prevent
leaking.
Using the Drain Hose Connector
1
Insert the band clamps into the end of the
Main and Mini Washer's drain hose.
2
Attach each drain hose to the double drain
hose connector and tie them with the band
clamps.
3
Insert the drain hose connector into the
drain pipe/hole.
Band clamp
CAUTION
• Make sure the drain hose is not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
• Depending on the installation environment,
you may have to purchase a separate drain
hose connector.
Band clamp
EN
Drain hose
connector
17