Table of Contents
Advertisement
5.USB docking display introduction
5. USB docking display
introduction
Philips USB-docking monitors deliver
universal port replication, for a simple,
clutter-free, notebook connection.
Securely connect to networks, transmit
data, video and audio from laptop only
using a single USB cable.
Even more, dock with USB Type-C port
for extra power delivery. For docking
monitors with built-in DisplayLink
Technology, users can benefit from
forward and backwards compatibility of
USB with virtually any latest notebook.
5.1 How to operate USB docking
display through USB-C to C
cable?
1. Connect the USB C-C cable to
the USB-C1 port on the monitor
and to your laptop. It can transmit
video, audio, data, network, power
through USB-C cable.
2. Make sure [USB C1] is selected in
the input source list.
Note
1. Ensure your source device
compatible DP Alt Mode over the
USB type C to C cable.
2. Only USB-C1 port supports USB
docking function.
USB C-C
USB-C1
5.2 How to operate USB docking
display through USB-C to A
cable?
If your laptop doesn't have USB-C
1
port, connect the USB C-A cable to
the USB-C1 port on the monitor and
to your laptop, waiting for a couple of
minutes, it will automatically install the
DisplalyLink Software, the premise is
that the network must be connected
from your devices. You can also install
DisplayLink software through below
steps.
Make sure [USB] is selected in the input
source list.
DisplayLink installation procedure:
1. Double click Setup.exe file which is
available in CD disk or https://www.
displaylink.com/downloads.
17
USB-C1
USB Type-A + Dirver
OR
Advertisement
Table of Contents
