Table of Contents
Advertisement
EN
ORIGINAL INSTRUCTIONS
Safety, performance, and dependability have been
given top priority in the design of your wet/dry vac.
INTENDED USE
The wet/dry vac is intended for wet and dry vacuuming
and blowing in workshop, household and similar non-
industrial applications. The product can also be used for
vacuuming dust and debris directly from ONE+ power
tools.
Do not use the product for any other purpose.
WET/DRY VAC SAFETY WARNINGS
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved.
The product is intended for household use only.
Never vacuum materials such as hot coals, cigarette
butts, matches, etc.
Do not use the product without the filter in place.
Use extra care when using the product on stairs.
Do not use the product to pick up hard objects such
as nails, screws, coins, etc. Damage or injury could
result.
Always close the battery cover and lock it in place
before use. Do not expose the battery pack to rain
or wet conditions.
Remove the battery when the product is not in use or
when changing accessories.
Rechargeable batteries are to be removed from the
product before being charged.
Exhausted batteries are to be removed from the
product and safely disposed of.
If the product is to be stored unused for a long
period, the batteries should be removed.
The supply terminals are not to be short-circuited.
SAFETY WARNINGS FOR BLOWER
Wear a face filter mask in dusty conditions to reduce
the risk of injury associated with the inhalation of
dust.
Do not point the blower nozzle in the direction of
people or pets.
Never place objects inside the nozzle or hose.
Do not operate the product near open windows.
Slightly dampen surfaces in dusty conditions.
Do not place the product on top of or near loose
debris. Debris may be sucked into intake vent
resulting in possible damage to the product.
Do not operate the product with defective guard,
enclosure, or shields.
Always be sure of footing on slopes and to walk,
never run.
Do not touch moving hazardous parts before the
product is disconnected from the power supply/
battery pack and the moving hazardous parts
have come to a complete stop.
Always wear substantial footwear and long
trousers while operating the product.
If the product is dropped, suffers heavy impact,
or begins to vibrate abnormally, immediately stop
the product and inspect for damage or identify
the cause of the vibration. Any damage should
be properly repaired or replaced by an authorised
service centre.
ADDITIONAL BATTERY SAFETY WARNINGS
To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never
immerse your tool, battery pack, or charger in
fluid or allow fluid to flow inside them. Corrosive
or conductive fluids, such as seawater, certain
industrial chemicals, and bleach or bleach-
containing products, etc., can cause a short
circuit.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and
national provisions and regulations.
Follow all special requirements on packaging and
labelling when transporting batteries by a third
party. Ensure that no batteries can come in contact
with other batteries or conductive materials while
in transport by protecting exposed connectors with
insulating, non-conductive caps or tape. Do not
transport batteries that are cracked or leaking. Check
with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 43.
1. Utility nozzle
2. On/off switch
3. Battery cover
4. Battery port
5. Handle
6. Utility nozzle storage
7. Flexible hose
8. Blower port
9. Locking latches
10. Filter
11. Crevice tool
12. Universal adapter
13. Operator's manual
14. Battery pack
15. Charger
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3
Advertisement
Table of Contents
