GMC Hummer EV 2024 Owner's Manual page 178

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16639039) -
2024 - CRC - 3/20/23
178 Driving and Operating
Pitch and roll : Shows real-time vehicle pitch
and roll in a 3D gauge.
Ride height : Represents height as the
suspension is raised or lowered. Will reflect
real-time change to ride height mode. See
Air Suspension 0 207.
Steering angle : Displays degrees of tilt for
front and rear tires.
Suspension travel : Depicts up-and-down
movement of each tire as you traverse over
different terrain.
Tire pressure : Displays real-time tire
pressure plus indicator for over- or
under-inflation. See Tire Pressure Monitor
System 0 303.
Torque output : Real-time display of torque
output compared to peak available torque.
Torque vectoring : Displays how torque is
being distributed to each wheel.
On-Screen Auxiliary Switches
If equipped, certain aftermarket accessories
can be controlled through programmable
on-screen auxiliary switches inside the
Off-Road App. This feature requires user
installation of an auxiliary switch interface
module, which is mounted under the hood.
When an aftermarket accessory such as
off-road lighting is installed onto the vehicle,
it will be hard-wired to one of the
connections on the auxiliary switch interface
module. See your dealer.
Six on-screen auxiliary switches are available.
You can assign each on-screen switch a label
and icon of your choosing to match the
installed accessory. Assigning unique icons
to the on-screen auxiliary switches will help
you recognize them on views where there is
not enough room to show the text labels.
If the optional auxiliary switch interface
module is not installed, a message No
accessory connected to this switch displays
when you touch an on-screen auxiliary
switch.
If you want to relocate control of an
accessory to a different on-screen auxiliary
switch, for example from AUX 5 to AUX 2,
you would need to move the physical
connection of the accessory on the auxiliary
switch interface module.
There are several ways to display the
auxiliary switches on the screen. The
switches display in different sizes depending
on the view selected. You can rotate among
these views at any time.
Card View: Enables access to the auxiliary
switches alongside other infotainment
features. To access Card View, swipe up
or down on the right-hand side of the
infotainment screen to bring the Off-Road
content into view.
Pro View: Provides access to all auxiliary
switches while simultaneously viewing
several widgets. To access Pro View, select
the H icon from within the Off-Road App.
You may also define which switches you
want to see in this view. If you do not
use all six switches, you can remove the
unused switches from Pro View. The
available switches will be resized larger
and will be easier to touch.
AUX Control Panel: Shows the switch
icons in their largest possible size for ease
of use while driving on off-road terrain
that may make accurate screen touches
difficult. To access the AUX Control Panel,
select the AUX icon within the
Off-Road App.
To customize an on-screen auxiliary switch:
1. While the vehicle is in P (Park), touch the
OFF-ROAD icon on the infotainment
display.
2. Touch the AUX icon from within the app.