GMC Hummer EV 2024 Owner's Manual page 148

GMC Hummer EV Owner Manual (GMNA-Localizing-MidEast-16639039) -
2024 - CRC - 3/20/23
148 Infotainment System
1. Press on the steering wheel controls,
touch Google Assistant on the Home
screen, or use the wake up words Hey
Google or OK Google to activate voice
recognition. Google Assistant must be set
as the Default Assistant for the
the wake word options to work.
2. Clearly speak one of the commands
described later in this section.
Canceling Google Assistant
Press on the steering wheel controls
to cancel the Google Assistant request.
Helpful Hints for Speaking Commands
Voice recognition identifies commands that
are naturally stated in sentence form,
or direct commands that state the
application and the task.
For best results:
Speak the command naturally, not too
fast, not too slow.
Use direct commands without a lot of
extra words. For example, Call <name>
at work, Play followed by the artist or
song name, or Play followed by the
radio station number.
Direct commands are more clearly
understood by the system. An example of a
direct command is Call <number>.
If a cell phone number was saved with a
name and a place, the direct command
and
should include both. For example Call
<name> at work.
Voice Recognition for the Radio
When voice is started, the voice recognition
commands for AM, FM, and media apps (if
supported) are available.
Play <AM frequency> AM : Tune to the
radio station frequency identified in the
command (like nine fifty ).
Play <FM frequency> FM : Tune to the
radio station frequency identified in the
command (like one oh one point one ).
Play <Media> on <Audio Source> : Play
media like a song or channel using a
specified audio source such as Pandora or
Spotify. This command may require an
online connection.
Voice Recognition for the Phone
Make sure the phone is paired using
Bluetooth to use the phone related voice
commands.
Call <contact name> : Initiate a call to a
stored contact. The command may include
location if the contact has location numbers
stored. You must accept Personal Results
permission during set up for access to the
contacts.
Call < phone number> : Initiate a call to a
phone number of seven digits or 10 digits.
Send a message to <contact name> : Send
a message to a stored contact.
Voice Recognition for Navigation
Navigation commands can be used to start,
cancel route, or add way points/POI.
Navigate to <destination address> :
Initiate navigation to the address in the
command.
Find a <Place of Interest> : Find and
initiate navigation to a POI in the command.
Add <destination> on my way : Adds a
way-point to the current route.
Take me home : Starts navigation to
Home location set in Google maps.