Page 3
References to the relevant harmonize standards used or references to other technical specification in relation to which conformity is declared: BS EN 17128:2020 Riley Scooters Limited: Kings Lodge, London Road, Sevenoaks, EN 17128:2020 TN15 6AR, United Kingdom EN 60335-1:2012 This declaration of conformity is issued under the sole responsibility EN 60335-2-29:2004 of the manufacturer.
2.3 Assembly instructions Brake lever 1. Pull up the stem 2. Fold clip in 3. Attach headset to the stem, then screw towards the front firmly, ensuring it wheel. clicks and button in 2 screws each side is tight. using the Allen key provided.
2.4 Folding instructions 1. Push/slide the 2. Pull the clip firmly 1. Push Battery 2. Push the button up. away from the stem, clip in and hold. battery up, away while pushing the from the bottom stem down. of the stem. 3.
Page 10
The instructions show you how to charge and maintain the battery and provide some safety notices and the technical specifications. Please use the battery properly according to these instructions to prolong battery life and performance. 4.1 Battery parameters Name Parameter Type Li-ion battery Charging time...
4.3 Charging instructions Product Unfolded size 1131x450x1179mm Folded size 1131x450x475mm Height from baseplate to ground 115mm Net weight 15.7kg Charging Tyre size 10 inch pneumatic air tyre port with inner tube Tyre pressure 35 P.S.I (2.41 Bar) Battery connector Waterproof level IPX4 Basic Information Battery Capacity...
Unable to start up Check to see if the battery is charged. WARNING! Does not charge Check whether the plugboard has WARNING! electricity. 2. Check the charger to see whether the AC plug is connected (whether the light is on). 3.
1x Copy of Manufacturer's Limited Warranty Scan to download the App. Alternativelly, go to the Google Play Store (Android) or the Apple App Store (iOS) and search Riley Scooters to download and install the App. Be advised there is a minimum Android/iOS/Bluetooth version required.
Page 14
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the RS2 and is the answer not in the manual?
Questions and answers