Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MULTILANE ML4064-MCB-TR
Summary of Contents for MULTILANE ML4064-MCB-TR
- Page 1 ML4064-MCB-TR Technical Reference MSA Compliant OSFP MCB multilaneinc.com...
- Page 2 multilaneinc.com...
-
Page 3: Table Of Contents
Table of Contents Introduction ........................4 Key Features ........................4 ML4064-MCB-TR Hardware ....................4 3.1 Power-Up ........................4 3.2 Operating Conditions ..................... 5 3.3 LED Indicators ........................ 5 3.4 Low Speed Signals ......................5 3.4.1 External I2C ........................5 3.4.2 External HW Control ..................... 6 3.4.3 OSFP Connector Pin Access .................. -
Page 4: Introduction
Introduction The ML4064-MCB-TR is designed to provide an efficient and easy method of programming and testing 400G OSFP transceivers and active optical cables. It includes a complete user-friendly GUI supporting all features defined by OSFP MSA and simplifying configuration processes to enable intuitive memory map programming and testing. -
Page 5: Operating Conditions
OR banana plug U8 Table 1: Voltage Operating Conditions 3.3 LED Indicators The ML4064-MCB-TR includes on-board LEDs, for quick debugging and monitoring purposes. LEDs are summarized below: • LED D11 indicates whether a USB cable is plugged or not. • LEDs D13 and D12, colored green and red, respectively, are used for diagnostic purposes: ✓... -
Page 6: External Hw Control
Figure 3: Low Speed Signals Schematics 3.4.3 OSFP Connector Pin Access A pin header connector (J5) is available in the ML4064-MCB-TR, allowing user to access Low Speed Signals pins (control signals and I2C), and module power nets. Figure 4: OSFP Connector Pins Access... -
Page 7: Ml4064-Mcb-Tr Software
4.1 USB Driver In order to be able to communicate with the board, user need to install the USB driver of the ML4064-MCB-TR. This is available on the website under the following link (USB Driver icon): https://multilaneinc.com/products/ml4064-mcb-tr/ Below is a brief guide on how to install the USB Driver:... -
Page 8: Bootloader
Bootloader Accessing in bootloader mode allows the user to reprogram the microcontroller, this is done as described below: 1. Connect a jumper on (J1) situated close to the microcontroller. 2. Connect a USB cable between the PC and Board. 3. Power up the board with a +3.3V supply. 4. - Page 9 Revision History Revision number Date Description ▪ Initial Version 9/3/2020 multilaneinc.com...
Need help?
Do you have a question about the ML4064-MCB-TR and is the answer not in the manual?
Questions and answers