Related Manuals for MRC VP-68
Summary of Contents for MRC VP-68
- Page 1 MANUAL: VP-68 Oil-Free Vacuum Pump PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION 3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529 mrc@mrclab.com MRC.6.17...
- Page 2 This instrument is designed for laboratory usage only. Please read this manual carefully before installing or operating this equipment. The instrument shall not be modified in any way. Any modification will void the warranty and may result in potential hazard. We are not responsible for any injury or damage caused by any non-intended purposes and modifying the instrument without authorization.
- Page 3 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Page 4 When unpacking, notice if the pump is in good situation. If not, please contact the distributor or contact us by e-mail immediately for assistance: mrc@mrclab.com. Position Designation On/Off switch Muffler (Air outlet) Air Inlet Vacuum Gauge filter cartridge Moisture trap...
- Page 5 Please replace the cartridge when it is saturated with moisture or particle. Please remove the moisture trap by rotating it counterclockwise. Replace the cartridge by the same way. 167801-11 VP-68 Vacuum pump, AC110V/60Hz 167801-22 VP-68 Vacuum pump, AC220V/50Hz 167801-62 Repair kit for VP-68...
Need help?
Do you have a question about the VP-68 and is the answer not in the manual?
Questions and answers