Smeg SFP6401TVS Instruction Manual page 34

Pyrolytic cycle
1. Two minutes after the Pyrolytic cycle
starts, the
to indicate that the door is locked by a
device that prevents the door from
being opened.
It is not possible to select any
function once the door lock device
has been activated.
2. At the end of the Pyrolytic cycle, STOP
flashes on the display and a buzzer will
sound that can be deactivated by
opening the door or pressing/turning
one of the two knobs.
3. The door remains locked until the
temperature inside the oven returns to a
safe level. Wait for the oven to cool
down (the indicator light
off) and collect the residue deposited
inside the oven with a damp microfibre
cloth.
78
Cleaning and maintenance
indicator light comes on
will turn
During the first Pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for subsequent
cleaning cycles.