Display Light - Sony Ericsson T290c User Manual

Sounds & alerts
You can choose to be notified of an incoming call by the
buzzing of the vibrating alert. You can set the phone's
vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off
or when you have set the phone to silent.
• Off – all the time.
To set the vibrating alert
1. Scroll to Settings,
YES
Vibrating alert, .
YES
2. Select the setting you want,
From Settings,
, Sounds & alerts, you can also select:
YES
• Alarm signal that you hear during an alarm.
• Message alert when messages are received.
• Key sound when using the keypad.
• Minute minder to beep after every minute during calls.
26 Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
, Sounds & alerts, ,
YES
.
YES
Menu language
Most SIM cards automatically set the menu language to
the language of the country/region where you bought
your SIM card. If this is not the case, the preset language
is English.
Note: You can always choose Automatic by pressing
8888 in standby. You can always choose English by
pressing 0000 in standby. You can always choose
Chinese by pressing
To change the menu language
1. Scroll to Settings,
YES
2. Select a language,
YES

Display light

The display light can be set to automatic, off, or on. In
automatic mode, the display light is turned off a few
seconds after you press the last key.
Note: The display light, if set to On, consumes extra
battery power and reduces standby time.
Note: If keylock is on, the display light will only
activate when is pressed.
0008 in standby.
, Language, , Menu,
YES
.
.
YES