Sony Ericsson T226m User Manual page 43

To select preferred mode
YES
• Scroll to Connect,
Service and select GPRS and GSM or GSM Only.
Note: If you have chosen GPRS and GSM for your
preferred service and you are not connected to the GSM
network, you can see the status of GPRS coverage and
connection. Press the upper or lower side volume key
from standby to enter the Status menu and then scroll
to GPRS.
WAP profile settings
The WAP settings are stored in a WAP profile. In most
cases you only need to use one profile to access the
Internet.
Tip: If there are no data account or WAP profile settings
in your phone, you can enter data account settings when
you enter WAP profile settings. See Web Services,
YES
Options, , WAP Profiles,
YES
Enter a name, , Connect Using,
YES
Account, .
42 Setting up Mobile Internet
This is the Internet version of the user's guide. © Print only for private use.
YES
, Data Comm., Pref.
YES
, Add Profile,
YES
, Add
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
"Data account settings" on page 40.
2. Scroll to Web Services,
WAP Profiles,
3. Select Add Profile to add a new profile or select an
existing profile that you want to edit,
When selecting Add Profile enter a name for the profile,
YES
, Connect Using,
YES
be used,
Scroll to Save?,
When selecting an existing profile, you can do the
following:
• Rename – Change the name of the profile.
• Connect Using – Select data account.
• IP Address – WAP gateway server address.
YES
,
• Advanced – More profile settings, see below.
YES
,
• Delete – Remove the profile.
YES
, Options,
YES
.
YES
, select the data account to
YES
and enter the IP Address,
YES
.
YES
,
YES
.
. A list appears.