Ecom Tab-Ex 01 D2 Manual page 37

Installing the protective case
Insert the top of the device into the case, and then press the other side of the
case firmly to install it.
To remove the protective case from the device, twist the top edge of the case
until the device protrudes from it. Then remove the device from the case.
Charging the battery
Use the charger to charge the battery before using it for the first time.
L
Use only Ecom-approved chargers, batteries, and cables. Unapproved char-
gers or cables can cause the battery to explode or damage the device.
• When the battery power is low, the battery icon appears empty.
• If the battery is completely discharged, the device cannot be turned on imme-
diately when the charger is connected. Allow a depleted battery to charge for a
few minutes before turning on the device.
• If you use multiple applications at once, network applications, or applications
that need a connection to another device, the battery will drain quickly. To avoid
disconnecting from the network or losing power during a data transfer, always
use these applications after fully charging the battery.
37