Download Print this page

Galvin Engineering 41999CP Product Installation

Hand shower with hygienic grab rail

Advertisement

Quick Links

Product Installation Guidelines
GalvinAssist
Hygienic Grab Rail
PRODUCT CODES:
-
41999CP
SPECIFICATIONS
The GalvinAssist
®
WC's and accessible areas in health institutions, hospitals and detention facilities.
All the items can comply with clause 17 of AS 1428.1-2009 if positioned correctly according to
the standard.
IMPORTANT: All Galvin Engineering taps are tested in accordance with AS/NZS 3662 and leave
our premises in good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Finish
The shower may not be suitable for use in gravity-fed water heaters, low pressure supply networks,
instantaneous water heaters, tempering valves and thermostatic mixing valves. (AS3662-2013).
For use with potable water only. Not suitable for low or unequal pressure water supply.
NOTE: Galvin Specialised continually strive to improve their products. Specifications may change
without notice.
TOOLS REQUIRED
Power drill
Spanner or adjustable crescent
© Galvin Engineering Pty Ltd
®
CP Hand Shower with
range of Stainless Steel grab rails provide safe and reliable fixtures for
Version 1, 25
Version 1, 1 June 2022, Page 1 of 5
½" BSP – Female
Handheld Shower
N/A
Min
150
Max
500
Min
5
Max
55
8.24
Chrome
th
May 2022, Page 1 of 5

Advertisement

loading

Summary of Contents for Galvin Engineering 41999CP

  • Page 1 All the items can comply with clause 17 of AS 1428.1-2009 if positioned correctly according to the standard. IMPORTANT: All Galvin Engineering taps are tested in accordance with AS/NZS 3662 and leave our premises in good working order. TECHNICAL DATA ½”...
  • Page 2: Mounting Details

    Product Installation Guidelines Version 1, 25 May 2022, Page 2 of 5 PRE- INSTALLATION MOUNTING DETAILS © Galvin Engineering Pty Ltd...
  • Page 3 May 2022, Page 3 of 5 INSTALLATION INSTALLATION COMPLIANCE: Galvin Engineering products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
  • Page 4 Fit elbow over spigot and secure with grub Connect hose and shower head ensuring screw. the connection is secured, then turn on water Using 2.5mm hex key supplied, tighten 5mm supply. Check for any leaks. grub screw. © Galvin Engineering Pty Ltd...
  • Page 5: Troubleshooting

    The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty. Ltd. hereby specifically disclaims all other warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.

This manual is also suitable for:

Galvinassist cp