Bosch BCS61 Information For Use page 16

en Cleaning and servicing
Runtime
Mode 2 up to min.
Mode 3 up to min.
Notes
¡ Like every Li-ion battery, the batteries
from the Power for ALL 18 V series wear
out over time, meaning that the battery
capacity and the runtime decrease. This
is a natural aging process and not the
result of a material error, manufacturing
error or material defect.
¡ You can delay the natural wear by using
the following measures:
– Only charge the battery in the temper-
ature range between 0 °C and 45 °C.
– Only store the battery in the temperat-
ure range between -20 °C and 50 °C.
– Do not store the battery for an exten-
ded period of time if it is fully charged
or fully discharged.
Operating the appliance
→ Fig. -
11 14
Removing the appliance
Press the release button to remove the
▶
suction pipe from the appliance's con-
nection port or floor nozzle.
→ Fig.
15
Cleaning and servicing
To keep your appliance working efficiently
for a long time, it is important to clean and
maintain it carefully.
Cleaning the appliance
Clean the appliance and the accessory
▶
using a soft cloth and a commercially
available plastic cleaner.
→ Fig.
16
Emptying the dust container
→ Fig. -
17 20
Cleaning the filter unit
▶ Never allow the filters to come into con-
tact with liquids.
→ Fig. -
21 27
16
18 V 2,5 Ah
25
8
Cleaning the nozzles
→ Fig.
Troubleshooting
▶ Repairs to the appliance should only be
▶ Only use genuine spare parts when re-
The appliance is not working.
The battery status display does not show
any status.
The battery has not been inserted correctly.
▶
The battery has not been charged.
▶
The red battery status display lights up for
10 seconds.
The battery has overheated or overcooled.
1.
2.
The appliance has overheated or
overcooled.
1.
2.
The dust container cannot be inserted.
The filter unit is not complete.
▶
The filter unit or dust container is not
positioned correctly.
▶
18 V 3,0 Ah
30
10
-
28 30
carried out by trained specialist staff.
pairing the appliance.
Insert the battery correctly.
Charge the battery.
Switch off the appliance and disconnect
the appliance from the power supply.
Wait until battery has reached room
temperature.
Switch off the appliance and disconnect
the appliance from the power supply.
Wait until the appliance has reached
room temperature.
Check whether the filter unit is com-
plete.
Check whether the filter unit and dust
container are inserted correctly.