Intex ULTRA XTR 126784GN Owner's Manual page 7

2. U-SHAPED TOP RAIL INSTALLATION (refer to figure 2):
1
3. INSTALLATION OF THE REMAINING LADDER SIDE (refer to figure 3):
4. TOP BRACE INSTALLATION – ONE SIDE AT A TIME (refer to figure 4):
3
5. BEFORE USE OF LADDER:
With all parts now in place, verify that all fasteners/screws are fully tightened and apply
downward pressure to each step to be sure they are fully anchored in place. place the
ladder over the side wall of your pool, with one side of the ladder located inside the pool
and the other side outside of the pool - see figure 5.
• Locate ladder on a level, solid base and make sure the ladder is stable
and safe to climb.
• Remove and secure ladder away from the pool when the pool is not in
use to prevent unauthorized, unintentional or unsupervised pool entry.
• Check all nuts and bolts regularly and before each use to ensure the
ladder is sturdy. See maintenance instructions.
S AVE THESE INSTRUCTIONS
(330IO) 36", 42", 48" 1-SECTION POOL LADDER ENGLISH 4.875" X 7.25" 04/21/2022
LADDER SETUP (continued)
2
B
A
4
4
WARNING
4
Page 6
330
A
3
5