HAMPTON BAY LYNDHURST 51015 Use And Care Manual page 11

Assembly - Attaching the Light Kit
9
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the black bracket below
the fan motor assembly (D).
□
Connect the wires exiting the bottom of the motor assembly
(D) by connecting the molded adaptor plugs (SS) together.
□
Slide the switch cup light kit (E) and secure it to the black
bracket using the three screws (QQ) that were removed in
the first step.
QQ
D
SS
G
E
10
Attaching the glass shades
and bulbs
CAUTION: Make sure the power is off before attaching or
removing the glass shades.
WARNING: Allow the glass shade to cool completely before
removing.
□
Insert the glass shade (I) into the glass holder by carefully
squeezing the steel tensioners (TT) on the light fixture
together.
□
Gently slide the glass shade (I) over the steel tensioners
(TT). Make sure the glass shade is fully inserted into the
socket for a secure fit. Repeat for the remaining glass
shades.
□
With the power off, install the light bulbs (J) (Max. 14W,
provided) into the light bulb sockets.
TT
GG
11
Please contact 1-877-527-0313 for further assistance.
E
I
GG
J
HAMPTONBAY.COM