Setting A System Pin Code; Adjusting The Cec Settings; Managing Mobile Devices; Pairing The Vizio Voice Remote - Vizio Quantum 6 M Series User Manual

Setting a System PIN Code

You can set a system pin to lock content and
System Pin Code
picture modes, as well as prevent accidental
system resets. The first time you select System
Change the PIN used for the System PIN.
PIN Code, you will need to create a PIN.
To create a PIN:
Menu > System > System PIN Code >
Enter Your PIN > Save
Cancel
WARNING: You will need to enter your current PIN code the next
time you access this menu or if you'd like to change your PIN.

Adjusting the CEC Settings

The CEC function on your TV enables you to control devices connected to an HDMI
input with the VIZIO TV remote, without any programming
Menu > System > CEC
New PIN
Select a setting and then press OK.
Confirm PIN
• CEC — To use CEC, you must select Enable.
Device Discovery — To determine if your device is connected and supports CEC,
•
select Device Discovery and then press OK .
1 2 3
4 5 6
CEC Audio Setup
7 8 9
Connect your audio device to the HDMI-1 (HDMI ARC) input on the TV. On your audio
0 device, select the HDMI ARC input.
X
Using CEC, your VIZIO TV remote can control such features including
Save
(depending on specific device):
• Power On/Off
• Volume and mute
• Play and pause
WARNING: Not all HDMI devices support CEC. See your device's
user manual for details.

Managing Mobile Devices

Mobile Devices
Your TV can be paired with a mobile device
so you can easily control your TV across
Tom's Tablet
multiple devices.
Frank's Phone
Work iPad
To see a list of paired devices or unpair
a device:
Menu > System > Mobile Devices
Highlight a device name to delete it and
press OK.

Pairing the VIZIO Voice Remote

To pair your Voice Remote:
Menu > System > Voice Remote
Select Pair New Remote, then press and hold both the
MUTE buttons for 5 seconds to launch pairing mode.
To use your successfully paired voice remote:
Press and hold the MIC
button while speaking a command.
To check for voice remote updates:
Menu > System > Voice Remote > Check for Update
To unpair a remote:
Menu > System > Voice Remote > Unpair Remote
MIC and
31