Yamaha WaveRunner FX HO 2016 Owner's/Operator's Manual page 48

Instrument operation
By switching the display units, the speed can
be shown in kilometers per hour (km/h) or
miles per hour (mph).
TIP:
Miles are selected as the display units at the
Yamaha factory.
1 Digital speedometer
Digital speedometer display (mph)
The "SPEED" indicator light blinks three
times if miles are selected as the display units
when the multifunction information center is
activated.
TIP:
If the analog speedometer is selected, the
"SPEED" indicator light blinks three times,
then comes on.
Digital speedometer display (km/h)
The "SPEED" indicator light blinks once if ki-
lometers are selected as the display units
when the multifunction information center is
activated.
TIP:
If the analog speedometer is selected, the
"SPEED" indicator light blinks once, then
comes on.
To switch the digital speedometer display
units:
Push the "VOLT/HOUR" button for at least 1
second, within 10 seconds after the multi-
function information center is activated. The
digital speedometer display changes. When
42
the display units are switched from kilome-
ters to miles only, the "SPEED" indicator light
blinks three times.
1
1
1 "VOLT/HOUR" button
2 "SPEED" indicator light
TIP:
The display units can also be switched by
pushing the "START/STOP" button and
"MODE/RESET" button simultaneously for at
least 8 seconds.
1 "START/STOP" button
2 "MODE/RESET" button
EJU42261
Hour meter/voltmeter
The hour meter/voltmeter has both an hour
meter function and a voltmeter function. By
switching the meter, it can be used as either
an hour meter or a voltmeter.
2
1
2