Table of Contents
Advertisement
Using EPG (Electronic Programme
Guide)
EPG is an on-screen guide that displays scheduled
digital TV programmes. You can navigate, select and
view programmes.
1. Press
on the remote control, select Channel >
EPG and press OK/
remote control, the EPG menu will appear, which
allows you to get information about the current
or next programme playing on each channel.
Navigate through the different programmes using
the
buttons on the remote control.
/
/
/
2. Use the related buttons shown at the left of the
screen to view EPG.
- Catch up: Press the
Freeview Play service.
- Option: Press
to select date, display
programme filter, or view your schedule list.
3. Press
to exit EPG.
Bluetooth function
(* not available for some models)
®
Bluetooth
is a wireless technology standard for
exchanging data over short distance between
Bluetooth devices. You can connect Bluetooth audio
device, mouse or keyboard via the TV.
1. Press
on the remote control, press
to move the cursor to
screen and press OK to enter.
2. Select Remotes & Accessories > Add accessory
and press OK to enter. The TV will search nearby
Bluetooth devices automatically. Select an
available device, press OK and follow the guides
on the screen to connect it.
Note: Bluetooth technology (if available in your TV)
uses 2.4GHz frequency thus close proximity
to Wi-Fi access points, routers or microwave
ovens might interfere with Bluetooth audio
streaming. If you face interruptions in
audio reception, you should restart your
Bluetooth device to find frequency with less
interferences and if you continue to face
issues you should move closer to TV or
increase space between TV and source of
interferences.
®
The Bluetooth
word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by TTE Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
to enter, or press
on the
button to access the
/
/
on the right top of the
Quick start function
It enables you to turn on your TV faster from standby
mode than turning this function off, but it will also
increase standby power consumption.
1. Press
on the remote control, select
Preferences > Quick start > Enable quick start
and press OK to toggle between on and off
2. Press
to return to the previous menu.
Networked waking up
This function allows you to turn on your TV from
standby mode via a network. To use this function,
please make sure:
1. Your TV is connected to an effective wireless home
network;
2. The desired controller, such as a smartphone, is
connected to the same wireless network as your
TV;
3. An App which supports networked waking up
function, such as Youtube, has been installed into
the controller;
4. Networked standby is turned on in the Network
& Internet menu from the homepage.
When the TV is in networked standby mode, you can
use the App to wake up the TV remotely.
Notes:
/
- This feature is disabled if you press and hold the
button on the remote control and confirm to
shut the TV down.
- Before using the feature of networked waking up,
make sure the Quick start function is enabled.
Reset to factory default settings
Allows you to reset the TV to factory default settings.
1. Press
on the remote control, select
Preferences > Reset > Factory data reset >
Erase everything and press OK to confirm.
2. Use the numeric buttons on the remote control to
enter the password 1234 or the PIN according to
the on-screen prompt.
3. Select OK and press OK to confirm.
4. The Welcome screen appears. Follow the
instructions in the section Initial setup.
Using the hands-free TV voice control
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access
EN 15
Using more of your TV
> Device
.
> Device
Advertisement
Table of Contents
