Table of Contents
Advertisement
5.
AMD FreeSync : To control support AMD FreeSync or not, default is On..
---------------------------------------------------------------------------------------------------------
Note: Only in the Support AMD FreeSync environment the control the AMD
FreeSync (On/Off) effect, such as in NVIDIA or Intel graphic card, Non-AMD
FreeSync Environment no effect.
6.
Refresh rate num: Display the panel's current refresh rate on the screen.
Note: If AMD FreeSync set "On" you can see the V Frequency to changes in the OSD.
7.
VRB: To choose whether to support dynamic picture more clean control, default is Off.
---------------------------------------------------------------------------------------------------------
Note:
1. VRB set "On", when to turn on AMD FreeSync, will auto set VRB is "Off".
2. VRB set "On", when to adjustment (Brightness, Blue Light, ACM), will auto
set VRB is "Off".
3. VRB function does not affect the (Logo, Message and Input Icon)
brightness.
4. VRB setting "On", when detection of Input Timing <75Hz, will auto off the
VRB and gray out to disable.
5. VRB = (Normal or Extreme), because the IC control dynamic picture is
cleaner, so the overall Brightness will be dark, "Extreme" will be darker than
"Normal".
OSD
Mode - Standard
Picture
Language
Color
OSD Timeout
Audio
Transparency
OSD Lock
Performance
OSD
System
Informa�on
1.
Press the MENU key to open the OSD.
2.
Press up or down button to select OSD from the OSD. Then press enter button to enter
it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Language: Set the OSD menu language.
5.
OSD timeout: Adjust the delay before turning off the OSD menu.
6.
Transparency: The transparency can be 0% (OFF), 20%, 40%, 60%, or 80%.
English
10
Off
Off
Advertisement
Table of Contents
