DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center.
Page 4
1. Important degrees. If the -5 degree downward excessive pressure on the LCD tilt angle maximum is exceeded, the panel. When moving your monitor, monitor damage will not be covered grasp the frame to lift; do not lift under warranty. the monitor by placing your hand or fingers on the LCD panel.
1. Important Ghost image Note Consult a service technician if the • Always activate a moving screen monitor does not operate normally, or saver program when you leave you are not sure what procedure to take your monitor unattended. Always when the operating instructions given activate a periodic screen refresh in this manual have been followed.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails participation in national take-back This marking on the product or on...
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
Page 8
2. Setting up the monitor Earphone jack Connecting to your PC USB downstream/USB fast charger USB downstream Kensington anti-theft lock Connect to PC 7 8 9 1. Connect the power cord to the back Fast Charger of the monitor firmly. 2.
Page 9
The display must be powered ON at all times to be able to use this function. Some select Philips displays may not Power or Charge your device when it enters to “Sleep/Standby” mode (White power LED blinking). In that case, please enter to OSD Menu and select “USB Standby Mode”, then, turn the...
2. Setting up the monitor Webcam 2.2 Operating the monitor Description of the control buttons Switch monitor’s power ON and OFF. Microphone Access the OSD menu. IR of Face identification Confirm the OSD adjustment. 2.0 Megapixel Webcam Adjust the OSD menu. Webcam activity light PowerSensor Change the signal input...
Page 11
"ON" mode: it On-Screen Display (OSD) is a feature makes the screen looks slightly dim; for in all Philips LCD monitors. It allows an optimum brightness, enter to the OSD end user to adjust screen performance to set "DPS"...
Page 12
2. Setting up the monitor Resolution notification Height adjustment This monitor is designed for optimal performance at its native resolution, 1920 x 1080 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1920 x 1080 for best results.
2. Setting up the monitor Note 2.3 Remove the Base Assembly This monitor accepts a 100mm x 100mm for VESA Mounting VESA-Compliant mounting interface. Before you start disassembling the VESA Mounting Screw M4. Always monitor base, please follow the contact manufacturer for wall-mount instructions below to avoid any possible installation.
What is it? Philips' innovative and secure webcam pops up when you need it and securely tucks back into the monitor when you are not using it. The webcam is also 2.
Page 15
2. Setting up the monitor d. You'll now see which options are available to set up under Windows Hello. • e. Click on "Get started." The setting is complete. Note 1. Please always go to Windows official website to access the latest information, the information in EDFU is subject to change without further notice.
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. • EasyRead: Helps improve reading Based on a scenario you select, of text based application like PDF SmartImage dynamically enhances the ebooks.
Developed for wellbeing, Philips LowBlue Mode setting uses a smart software technology to reduce harmful shortwave blue light. • Off: No optimization by SmartImage.
5. PowerSensor™ detection signal for distances up to 5. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the display, step up of transmission and reception of...
Page 20
5. PowerSensor™ Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength. Keep sensor lens clean, if the sensor lens is dirty, wipe it with alcohol to avoid reducing of distance detection .
6.Technical Specifications 6. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.2745 (H) mm x 0.2745 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 1920 x 1080 @ 60 Hz Viewing Angle 178°...
Page 22
6.Technical Specifications English, German, Spanish, Greek, French, Italian, Hungarian, Dutch, Portuguese, Brazil Portuguese, OSD Languages Polish, Russian, Swedish, Finnish, Turkish, Czech, Ukranian, Simplified Chinese, Traditional Chinese, Japanese, Korean Other Convenience VESA mount (100 x 100 mm), Kensington Lock Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8/7, Mac OS X Stand Tilt...
Page 23
(Non-operation) Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
7.Power Management 7. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced...
Page 27
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 28
8.Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
Service contact information listed in known as "after-imaging" or "ghost Regulation & Service Information Manual imaging", on your screen. "Burn-in", and contact Philips customer service "after-imaging", or "ghost imaging" representative. is a well-known phenomenon in * Functionality different according to LCD panel technology.
Page 32
• Shut down your computer, scratches? disconnect your old monitor and Ans.: In general it is recommended reconnect your Philips LCD monitor. that the panel surface is not • Turn on your monitor and then turn subjected to excessive shocks on your PC.
Page 33
PC, workstation or Mac? may result in severe “burn-in” or “after- image” or “ghost image” symptoms Ans.: Yes. All Philips LCD monitors are that will not disappear and cannot be fully compatible with standard repaired. The damage mentioned above PCs, Macs and workstations.
Page 34
9.Troubleshooting & FAQs Q14: Where can I find Regulation & Service Information Manual mentioned in EDFU? Ans.: Regulation & Service Information Manual can be download on the Philips website support page.
Page 35
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.