Related Manuals for MUBVIEW ZS-GX7S
Summary of Contents for MUBVIEW ZS-GX7S
- Page 1 A Smarter Safety Solution QUICK START GUIDE www.mubview.com support@mubview.com ZS-GX7S +1 (978)3092611...
-
Page 2: Warranty Service
Instructions: This product does not support 5GHz WiFi networks and must be connected to a 2.4GHz WiFi network! *If you're unsure how to find a 2.4GHz WiFi network, please search Google for instructions or contact us. Produkt-Service Email:support@mubview.com Verteiler: business@mubview.com Mehr über uns Web: www.mubview.com... -
Page 3: Camera Introduction
Camera Introduction ① ② ④ ③ ⑤ 1. Lens 4. Speaker Holes 2. Microphone 5. Bracket 3. PIR ⑨ ⑩ ⑥ ⑦ ⑧ 6. Power Key 10. Reset 7. Charging Indicator 11. Working Status Indicator 8. Ventilation Holes 12. SD Card Slot 9. -
Page 4: Download & Install App
Download & Install App The camera supports Android and iOS system. Please scan the QR code below or search 'MUBVIEW' in App store to download the App, and follow the instruction to register account. If you encounter any problems during the installation process, please feel free to contact us via support@mubview.com... -
Page 5: Add Camera To App
Add Camera to App 1. Allow 'MUBVIEW' App to access mobile cellular data and wireless LAN, or it will fail to add camera. 2. Allow 'MUBVIEW' App to receive pop-up messages, otherwise the smart phone will not receive notification when motion is detected. -
Page 6: Preparation For Connection
Preparation for Connection 1. Insert Micro SD card when the camera is Power o (Supports up to 128GB.SD card not included). The camera only works with 2.4GHz Wi-Fi, not support 5GHz Wi-Fi. 2. Take the camera close to the router while connecting. - Page 7 Connect the Camera to App Add Device Select Your Device Click “Next” Click “Next”...
- Page 8 Note: If the camera fails to connect to the network, please move the camera closer to the Wi-Fi router, then press and hold the "Reset" button for more than 5 seconds. Once you hear the prompt sound, reconnect the camera. If the issue persists, please email us at support@mubview.com...
-
Page 9: Install The Camera
Install The Camera Mounting Height: 2-3 Meters PIR Detecting Distance:1-7Meters GX7S is only for indoor use,please install it indoors according to the instructions and keep away from water sources. It's recommended to select the location before installation Once the 3M glue is attached,it will not be easy to remove (to avoid damage to the wall). -
Page 10: Battery Management
If there is any motion detection delay or false alerts, please contact 24/7 after-sales service via support@mubview.com Battery Management 1. The camera's Battery can last 1-2 months, assuming triggering of 30 times/day. - Page 11 Device administrators can share their devices with multiple people. (Invitees need to download and install the "MUBVIEW" application, register an account, and log in to the application.) Sharing steps: Step 1: The sharer scans the invitee's QR code or enters the invitee's account.
- Page 12 Wi-Fi amplifier to improve the Wi-Fi performance of the home. 4) Delete the camera from your Mubview account and add it again after esetting the device. Check whether the device firmware and application program are the latest version.
- Page 13 The phone cannot receive the alarm push? 1) Turn on all the push permissions of the "Mubview" application in the system settings of your mobile phone. 2) Make sure that the device's motion detection function is successfully turned on.
- Page 14 The indicator is red and blinking slowly but does not blink fast after the device scanned the QR code, and does not make a sound like "bee" The above case might be caused by any of the following reasons: the QR code is abnormal, the lens is defocused or the device is defective.
- Page 15 APP Please provide us your SN/ account info as well as the exact time you setup your device.We will forward these info to the technical engineer team for a further troubleshooting. support@mubview.com MUBVIEW o cial after-sales email:...
- Page 16 Made In China FCC ID: 2AZL7-ZS-GX1S...
Need help?
Do you have a question about the ZS-GX7S and is the answer not in the manual?
Questions and answers