LEGRAND DA-LITE User Manual
  1. Manuals
  2. Brands
  3. LEGRAND Manuals
  4. Control Systems
  5. DA-LITE
  6. User manual

LEGRAND DA-LITE User Manual

Single motor low voltage control system
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Single Motor Low Voltage
Control System
USER MANUAL
98885

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DA-LITE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LEGRAND DA-LITE

Summary of Contents for LEGRAND DA-LITE

  • Page 1 Single Motor Low Voltage Control System USER MANUAL 98885...

  • Page 3: Important Safety Instructions

    Incorrect reassembly can cause electric shock Da-Lite® is a registered trademark of Legrand AV. All when the appliance is used subsequently. rights reserved. 5. The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.

  • Page 4: Pre-Installation

    PRE-INSTALLATION The low voltage control (LVC) housing is divided into 3 compartments. the compartment labeled “Low Voltage Connections” is where you will connect the wall switch or a central control panel. The compartment labeled “AC Power Connections” is where the main power and motor wire connections are made. The center compartment only requires access when connecting an infrared or radio frequency remote receiver.

  • Page 5: Ac Power Connections

    AC POWER CONNECTIONS Screen Motor 1. Connect the motor wires in the screen junction box to 2. Use 14-18 gauge wire to extend the motor wire to the the LVC wires labeled “motor wires” . Refer to diagram required length. 120VAC 60Hz 230 VAC 50Hz Green...
  • Page 6 OPTIONAL SCREEN CONTROLLER CONNECTION: 2. Route the ethernet cable through the round platic 1. Remove the cover plate labeled "Low voltage bushing and plug into the onboard RJ-45 port. Refer connections" and the center cover plate. to diagram 4. Optional Screen 120VAC 60Hz Controller Connector 230VAC 50Hz...

  • Page 7: Troubleshooting

    TROUBLESHOOTING Symptom Cause Solution Turn on power to LVC input. Measure voltage across No power to LVC unit. black and white input leads Recheck all wiring for proper installation. Check all wire Incorrect wiring. nut connections. Screen will not operate. he wall switch terminal is for dry contact (no voltage) Low voltage circuit damaged due to input only.
  • Page 8 EMEA +31 495 580 840 av.emea.sales@legrand.com APAC +852 2145 4099 av.asia.sales@legrand.com ©2023 Legrand AV Inc. 230327 Rev C 04/23 Da-Lite is a registered trademark of Legrand AV Inc. All other brand names or marks are used for identification purposes and are...

Table of Contents

Save PDF