Related Manuals for Ocilion IPTV Technologies P570 Hybrid
Summary of Contents for Ocilion IPTV Technologies P570 Hybrid
- Page 1 P570 Hybrid IPTV set-top box Instructions for use Important: Read carefully before use and retain for future reference.
-
Page 2: Table Of Contents
Resetting the remote control..............20 Cleaning....................21 Returning used devices................21 Troubleshooting..................22 10 Legal notes..................... 25 10.1 Registered trademarks and notes on licences........25 10.2 Open Source Software.................. 25 11 Declaration of conformity............... 25 12 Technical specifications................. 26 2 | P570 Hybrid... -
Page 3: Safety Information
Maintain the following minimum clearances around the set-top box: 10 cm above, 5 cm behind, 2 cm on the sides. Never put the set-top box into a cabinet or shelf with insufficient ventilation. P570 Hybrid | 3... - Page 4 The heating of the set-top box is in the permissible range. However, sensitive furniture finishes may become discoloured over time due to ongoing heat exposure. The base can cause discolouration of furniture finishes. Place the set- top box on a suitable underlay if needed. 4 | P570 Hybrid...
-
Page 5: Intended Use
(Bluetooth mode) Combined connection for 3.5 mm jack (e.g. for headphones) and optical TOSLink (S/PDIF) For service use only, or as instructed by your provider. The connection of media can influence the serviceability of the set-top box. P570 Hybrid | 5... -
Page 6: Getting Started
IPTV system. Use either a network cable or WiFi to establish the connection. Please note, however, that if you connect to WiFi and other devices simultaneously use this internet connection, the bandwidth may be limited. This can cause issues with playback or interruptions. 6 | P570 Hybrid... -
Page 7: Inserting The Batteries Into The Remote Control
5.2 Cable connections 1. Connect the set-top box as shown in Figure 3 on page 8. Observe the correct connection sequence: HDMI cable ® Network cable Coax cable Power supply 2. Turn on your TV set. P570 Hybrid | 7... -
Page 8: Pairing The Remote Control
After the remote control is paired with the set-top box, the language selection options are displayed. Select the language of your choice for the user interface. 1. Select the language you want. 2. Confirm your selection by pressing the OK button. 8 | P570 Hybrid... -
Page 9: Establishing The Network Connection
Section "Establishing a WiFi connection" on page 9. 5.5.1 Establishing a WiFi connection Various methods are available for establishing a WiFi connection: Search: The set-top box searches for available WiFi networks. Advanced: Use WPS, or enter the SSID manually. P570 Hybrid | 9... - Page 10 OK. 5. Wait until the connection is established and then press Quit repeatedly until the message Successfully established the network connection. is displayed. Figure 5: WiFi setup Figure 6: Available WiFi networks 10 | P570 Hybrid...
- Page 11 To establish a WiFi connection using the advanced WiFi setup, proceed as follows: 1. In the setup menu, activate the button Advanced. 2. Navigate to the setup method of your choice. 3. Then follow the instructions on the TV set. Figure 7: Advanced WiFi setup P570 Hybrid | 11...
- Page 12 Connect the set-top box to a different WiFi network: Proceed as described in Section "Establishing a WiFi connection" on page 9. Establish the network connection using a network cable: Connect the network cable included in the package contents as described in Section "Cable connec- tions" on page 7. 12 | P570 Hybrid...
-
Page 13: Software Updates
TV set. This allows you to control the set-top box and your TV set with the remote control. To change the signal type (Bluetooth or infrared), see Section "Changing the signal type" on page 16. P570 Hybrid | 13... -
Page 14: Button Functions
6.1 Button functions Figure 9: Button functions 14 | P570 Hybrid... - Page 15 Stop (recorder/replay/video on demand) Page up/down Current programme (TV guide) Show programme Open stream settings Show quick guide Turn screen off (radio) Show programme details Show list of favourites Delete character Go to previous stream Show help P570 Hybrid | 15...
-
Page 16: Changing The Signal Type
Manual programming: you need to enter the TV code manually. Brand code search: you can search for the desired TV code within a brand. Automatic code search: you can search the entire TV database for a suitable TV code. 16 | P570 Hybrid... - Page 17 If the TV set does not respond to the command, complete steps 2 through 4 using other codes from the TV code list until the TV set turns off. 5. Switch the TV set on again and repeat step 4 to try other buttons, checking whether they work correctly. P570 Hybrid | 17...
- Page 18 4. Press the button to confirm the TV code. The red LED flashes twice in quick succession. Brand Code Brand Code Samsung Loewe Grundig Sony Sharp Philips Toshiba Panasonic Table 2: Brand codes 18 | P570 Hybrid...
-
Page 19: Controlling The Tv
TV. After programming a valid code, you can control your TV set. Press and hold the button, and then press the desired button to control your TV set. P570 Hybrid | 19... -
Page 20: Unpairing The Remote Control (Bluetooth Mode)
If the green LED flashes twice in quick succession, the remote control has been reset to the factory settings. The remote control is in Bluetooth mode. The Bluetooth connection to the set-top box and the programmed TV code (if any) have been erased. 20 | P570 Hybrid... -
Page 21: Cleaning
Reusing materials and recycling used devices makes an important contribution to protecting our environment. To facilitate the disposal of used devices containing batteries, the batteries have to be removed before the devices are brought to a public collection centre. P570 Hybrid | 21... -
Page 22: Troubleshooting
Check if the set-top box is unable to establish a connected to the mains connection to the set-top network. If the problem box. persists, you have to pair the remote control again (see Section "Pairing the remote control" on page 22 | P570 Hybrid... - Page 23 (see Section "Pairing the remote control" on page No picture No mains connection. Check that the power supply unit and cable are properly connected. Defective cable Check cable connections connection. to make sure they are tight. P570 Hybrid | 23...
- Page 24 15 minutes. was performed This may take up to 15 minutes. Table 3: Troubleshooting In case of further issues, contact your network operator. 24 | P570 Hybrid...
-
Page 25: Legal Notes
2014/53/EU - RED Directive 2009/125/EG - Ecodesign Directive 2011/65/EU - RoHS Directive The full text of the EU Declaration of Conformity is available at www.ocilion.com/ce P570 Hybrid | 25... -
Page 26: Technical Specifications
1 x USB 3.0 Interfaces Bluetooth Infrared 36 KHz (RC-5:SAT2) Wifi IEEE 802.11 b/g/n/ac/ax (2,4 / 5 GHz) Wifi security WPA / WPA2 PSK Copy protection Verimatrix Viewright HDMI HDCP 2.2 ® Table 4: Technische Daten set-top box 26 | P570 Hybrid... - Page 27 Environmental conditions Temperature +5 - +40 °C Humidity 20 - 80 % Details of the radio standard Frequency band 2,402 - 2,480 GHz Max. transmitter power 1 mW Table 6: Technical specifications of the remote control P570 Hybrid | 27...
- Page 28 Version 2.5 Date 2023-07-06 Hersteller: Ocilion IPTV Technologies GmbH Schärdinger Straße 35 • 4910 Ried im Innkreis / AUSTRIA Telefon: +43 7752 2144-0 • Internet: www.ocilion.com In the course of product improvements, we reserve the right to make technical and visual changes to the devices described in these instructions for use.