Figure 7. Remove the 5 screws
Screw specifications
2
M2.0 x 5.0
Step 3.
Remove the battery pack.
Figure 8. Remove the battery pack
Refer to "Major FRUs and CRUs" on page 24 to look up details about the following replacement part:
Battery pack
Remove the coin-cell battery
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the battery pack" on page 31
Step 1.
Lift the aluminum foil
32
Hardware Maintenance Manual
1
. Then, detach the coin-cell battery connector from the system board
Number of screws
5
2
.