Figure 29. Remove the LCD module (mylar version)
Figure 30. Remove the LCD module (glass version)
Screw specifications
M2.5 x L4.5
The LCD module is not a FRU. Instead, it contains FRUs as its components. Refer to "Disassemble the LCD
unit (mylar version)" on page 47 if you need to replace a FRU contained in the LCD module.
Remove the upper case
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the battery pack" on page 34
"Remove the solid-state drive (SSD) module (2242)" on page 34
46
Hardware Maintenance Manual
Number of screws
6