Display - Hitachi Relion 670 Series Operation Manual

1MRK500127-UUS Rev. M
Table 15:
Key
8.1.4

Display

On the front of the enclosure there is a backlit LCD.
• 6 x 12 pixel characters
• Graphical LCD 128 x 64 pixels
In figure
contains mains frequency information. Row 2-3 contains stator information and row 4-5 rotor information.
Column 1 (empty) gives status, column 2 and 3 are informative and column 4 contains variables, settable
by the keypad.
670 series
Operation manual
HMI keys on the front of the injection unit REX060
62 the content of the display is shown for a REX060 with one SIM and one RIM module. Row 1
© 2017 - 2023 Hitachi Energy. All rights reserved
Function
The Injection switch enables injection at rotor and stator 2 s after
switching on. A LED indicates that the injection switch is set to enable
injection. The injection switch can be padlocked in off position in order
to cut-off both injection signals.
The Key-lock button enables/disables the keypad.
Hold the Key-lock button for a period of 1.2 s to 4 s to lock or unlock
the keys. A key-lock LED indicates when the keypad is unlocked.
• Moves the cursor in the direction of the arrows
• When the cursor is in the value change state, pressing the up
button increases the value and pressing the down button
decreases the value.
Pressing the clear button cancels changes that have not been stored.
Pressing the enter button stores the changed value. If the value is
outside range, the limit value is stored.
Section 8
REX060 injection unit LHMI
GUID-FE74D8A4-BF75-498F-A204-CCB638EC18D1 v2
77