globalpayments Lane/3000 Quick Start Manual

Global Payments FLEX POS –
Semi-Integrated Lane/3000
Quick start guide
Welcome to your Global Payments FLEX POS – Semi-Integrated solution. This quick start guide is designed to
help you quickly get started with your semi-integrated payment solution. If this is your first setup, please contact
your Point-of-Sale (POS) or Electronic-Cash-Register (ECR) system provider to start.

Terminal ON/OFF

When the terminal is connected to the power supply, it will automatically
power up, initiate an application check and then enter the home screen.
Simply disconnect the power supply from the electrical outlet to power
off the device.

Power connection

Ensure your power supply comes from a surge protector connected to
your electrical outlet.
For an IP connection power setup – Plug the power cable into the power
port located at the edge of the ethernet cable connector.
For an RS232 connection power setup – Plug the power cable into the
power port on the adaptor/magic box

Network connection

For an IP connection power setup – Plug the end of the ethernet
connection cable into the device's ethernet port
For an RS232 connection power setup – Plug the one end of the
ethernet connection cable into the adaptor/magicbox

Administrator password

Contact the Global Payments Customer Care Centre at 1-800-263-2970
to set up your personalized admin password.
You will need to change your password once the terminal has been
installed.
© 2022 Global Payments Inc. All Rights Reserved.
1